• Blog & Videos
  • Events
  • 949.474.7222

Purple Porcupine

3D Printing Services

  • About
    • Careers
  • Services
    • 3D CAD Design
    • 3D Printing Services
      • FDM 3D Printing
      • PolyJet 3D Printing
      • SLA 3D Printing
      • DLP 3D Printing
      • SAF 3D Printing
      • MJF 3D Printing
      • Post-Process Finishing
    • 3D Scanning Services
    • RTV + Cast Urethane
    • Corporate Branding
  • Materials
    • FDM Thermoplastic Materials
    • PolyJet Materials
    • SLA Materials
    • DLP Materials
  • Request Quote
    • Instant Quote
    • Manual Quote
  • Contact

POLYJET PHOTOPOLYMERS

VeroUltraClear

VeroUltraClear has exceptional clarity and has strength, stiffness and impact resistance. 

Learn More
hand holding a perfume bottle that is square and turquoise
Clear Coat

See The Specs

Layer Height: 0.00055 in. (14 microns), 0.001 in. (27 microns)

86% light transmission through a 6mm thick sample.

VeroUltraClear has a higher level of clarity and transparency and a lower yellow index than standard VeroClear. Thermal properties are similar but mechanical properties are somewhat lower than VeroClear.

Request A Quote

Applications

Typical applications include concept models and prototypes for eyewear, lighting components, and the replication of glass and clear polymers.

Other uses include modeling clear tubes and housings for pumps and gearboxes to view fluid flow and internal mechanisms.

Printing With VeroUltraClear

Prototype Smarter

In 2020, an invasive species of lanternfly, the Spotted Lanternfly, threatened the Northeastern United States.

Hudson Valley Additive Manufacturing Center (HVAMC), located in upstate New York, has been a 3D printing resource for both the university and surrounding communities since 2014. Jim O’Connell, a senior resource educator at Cornell Cooperative Extension, approached HVAMC to have a highly realistic model of the bug made.

Prior to 3D printing the lanternfly, education models were limited to posters. These posters only showed one angle of insect. Preserving the insect was costly and time consuming, as the specimens were very delicate. HVAMC printed 3D models of the spotted Lanternfly with PolyJet technology, The resolution and color capabilities of PolyJet meant that the models were life-size and highly accurate.

The detailed replica was encased in the incredibly transparent VeroUltraClear, allowing the models to be handled and transported easily.

This is only one case where VeroUltraClear helped a company develop a model. There are unlimited possibilities with a material so versatile. To learn more about the 3D printing material options for your project, contact our team.

Download Case Study

At Purple Porcupine, you can depend on our 3D printing & rapid prototyping service to be exceptional, and our 3D printed models to hold tight tolerances with premium finishes. We use only the best of rapid prototyping technologies that will provide optimal solutions to change the way you design and create products.

ITAR Registered · 949.474.7222 · [email protected] · Start Your Project Today

POLYJET PHOTOPOLYMERS

VeroUltraClear

VeroUltraClear has exceptional clarity and has strength, stiffness and impact resistance. 

Learn More
hand holding a perfume bottle that is square and turquoise
Clear Coat

See The Specs

Layer Height: 0.00055 in. (14 microns), 0.001 in. (27 microns)

86% light transmission through a 6mm thick sample.

VeroUltraClear has a higher level of clarity and transparency and a lower yellow index than standard VeroClear. Thermal properties are similar but mechanical properties are somewhat lower than VeroClear.

Request A Quote

Applications

Typical applications include concept models and prototypes for eyewear, lighting components, and the replication of glass and clear polymers.

Other uses include modeling clear tubes and housings for pumps and gearboxes to view fluid flow and internal mechanisms.

Printing With VeroUltraClear

Prototype Smarter

In 2020, an invasive species of lanternfly, the Spotted Lanternfly, threatened the Northeastern United States.

Hudson Valley Additive Manufacturing Center (HVAMC), located in upstate New York, has been a 3D printing resource for both the university and surrounding communities since 2014. Jim O’Connell, a senior resource educator at Cornell Cooperative Extension, approached HVAMC to have a highly realistic model of the bug made.

Prior to 3D printing the lanternfly, education models were limited to posters. These posters only showed one angle of insect. Preserving the insect was costly and time consuming, as the specimens were very delicate. HVAMC printed 3D models of the spotted Lanternfly with PolyJet technology, The resolution and color capabilities of PolyJet meant that the models were life-size and highly accurate.

The detailed replica was encased in the incredibly transparent VeroUltraClear, allowing the models to be handled and transported easily.

This is only one case where VeroUltraClear helped a company develop a model. There are unlimited possibilities with a material so versatile. To learn more about the 3D printing material options for your project, contact our team.

Download Case Study

At Purple Porcupine, you can depend on our 3D printing & rapid prototyping service to be exceptional, and our 3D printed models to hold tight tolerances with premium finishes. We use only the best of rapid prototyping technologies that will provide optimal solutions to change the way you design and create products.

ITAR Registered · 949.474.7222 · [email protected] · Start Your Project Today

POLYJET PHOTOPOLYMERS

VeroUltraClear

VeroUltraClear has exceptional clarity and has strength, stiffness and impact resistance. 

Request A Quote

hand holding a perfume bottle that is square and turquoise
Clear Coat

See The Specs

Layer Height: 0.00055 in. (14 microns), 0.001 in. (27 microns)

86% light transmission through a 6mm thick sample.

VeroUltraClear has a higher level of clarity and transparency and a lower yellow index than standard VeroClear. Thermal properties are similar but mechanical properties are somewhat lower than VeroClear.

Applications

Typical applications include concept models and prototypes for eyewear, lighting components, and the replication of glass and clear polymers.

Other uses include modeling clear tubes and housings for pumps and gearboxes to view fluid flow and internal mechanisms.

Prototype Smarter

In 2020, an invasive species of lanternfly, the Spotted Lanternfly, threatened the Northeastern United States.

Hudson Valley Additive Manufacturing Center (HVAMC), located in upstate New York, has been a 3D printing resource for both the university and surrounding communities since 2014. Jim O’Connell, a senior resource educator at Cornell Cooperative Extension, approached HVAMC to have a highly realistic model of the bug made.

Prior to 3D printing the lanternfly, education models were limited to posters. These posters only showed one angle of insect. Preserving the insect was costly and time consuming, as the specimens were very delicate. HVAMC printed 3D models of the spotted Lanternfly with PolyJet technology, The resolution and color capabilities of PolyJet meant that the models were life-size and highly accurate.

The detailed replica was encased in the incredibly transparent VeroUltraClear, allowing the models to be handled and transported easily.

This is only one case where VeroUltraClear helped a company develop a model. There are unlimited possibilities with a material so versatile. To learn more about the 3D printing material options for your project, contact our team.


At Purple Porcupine, you can depend on our 3D printing & rapid prototyping service to be exceptional, and our 3D printed models to hold tight tolerances with premium finishes. We use only the best of rapid prototyping technologies that will provide optimal solutions to change the way you design and create products.

ITAR Registered · 949.474.7222 · [email protected] · Start Your Project Today

Rapid Prototyping. Today.

No matter what industry you come from, rapid prototyping is changing the way business is done. Through highly accurate, cost-effective and time-efficient processes, 3D rapid prototypes can be created in mere days.

Request a Quote

Locations

  • Irvine Headquarters
    16842 Hale Ave
    Irvine, CA 92606
  • Northern California Office + Showroom
    By Appointment Only
  • Phoenix Office + Showroom
    By Appointment Only
  • Pittsburgh Office
    By Appointment Only

Copyright © 2023 · Purple Porcupine · 3D Printing & Rapid Prototyping Services · Terms & Conditions · Privacy Policy

  • About
    ▼
    • Careers
  • Services
    ▼
    • 3D CAD Design
    • 3D Printing Services
    • 3D Scanning Services
    • RTV + Cast Urethane
    • Corporate Branding
  • Materials
    ▼
    • FDM Thermoplastic Materials
    • PolyJet Materials
    • SLA Materials
    • DLP Materials
  • Request Quote
    ▼
    • Instant Quote
    • Manual Quote
  • Contact